EC001 Electric Chassis This ready built chassis provides a sound basis for scratch building your own locomotives.The main chassis is formed from steel, wheels and axles are steel and there is a worm drive to one axle. The tough electric motor will operate happily on two AA batteries, or with up to 4.8 volts when used with a speed controller. The chassis is supplied as a kit complete with battery holder for 2 x AA cells and an on/off switch. DATA: Wheelbase: 60mm Wheel dia: 20mm Chassis length:120mm. Height (from rail to top of motor): 52mm Fixing holes: 2 at 3.2mm on 105mm centres. £22.34 Specify 32mm or 45mm gauge

 

GM001 Gearbox/Motor Unit A powerful electric motor, capable of running on 3 to 7.2 volts, with a fully enclosed 40:1 gearbox turning a 1/8" axle. A versatile power unit that can be mounted vertically or horizontally. £25.00

 

32mm Diameter Adjustable Wheels (insulated) These are ideal for use with the Gearbox/Motor Unit shown above. The wheels are zinc plated steel and are machined with a boss on the back with grub screws for locking wheels to axle. Comprises 2 x wheels, 2 x grub screws, 1 x 1/8" axle. £5.60

 

FB001 Freelance Bogies All castings and steel wheels included to make up a pair of bogies that are available in 32mm or insulated 45mm gauges as use din our rolling stock kits. £25.00

 

CH040 Deluxe 0-4-0 Electric Chassis Making an ideal basis for a scratch built diesel or steam outline loco, this chassis has a heavy duty motor and a fully enclosed gearbox. Axles are insulated steel and are coupled by fly cranks and coupling rods. Wheels are steel and can be adjusted to 32mm or 45mm gauge, and the 1/8" axles run in brass bearings. The chassis is in kit form and just requires assembly. DATA: Wheelbase: 60mm Wheel Diameter: 32mm Chassis length (buffer beam to buffer beam) 200mm. Width: 90mm. Motor: 4.8 to 12 volt. £47.04

 

CH060 Deluxe 0-6-0 Electric Chassis Have you got something long and powerful in mind? Make your dreams come true with this new kit. Perfect for scratch-builders, this heavy-duty kit features laser cut steel chassis with body and buffer beam mounting points, adjustable (32mm or 45mm) insulated steel wheels and axles, brass bearings, and powerful 7.2v (nominal) motor. A pair of slide switches are included. For those who think that too much power is just enough there is a twin motor option! DATA: Wheelbase 60mm + 60mm, wheel diameter 32mm (flangeless on centre wheel for use on tight curves) Chassis length 260mm, width 90mm. Motor 4.8 to 9 volt. £59.95

 

Wheels All steel wheel sets. Available in 16, 20 or 24mm diameter and in either 32mm or 45mm gauge, these wheels sets are sold as four wheels with two 1/8" axles.. They are ideal replacements for the plastic wheels fitted to some rolling stock as they add weight and improve running characteristics.