|8136501 DiMAX 1210Z Digital Central Station - £692.00|
|The DiMAX 1210Z Digital Central Station is a favorable alternative since it is built on the same technical properties as the DiMAX 1200Z. Up to 12 Amps driving current without an integrated transformer allows using the 1210Z for all scales from Z to G. Input Voltage: 16 to 24 Volts DC or 12 to 20 Volts AC. The current output can be adjusted to 4, 7, or 12 Amps. This option is desirable for smaller scales. The 1210Z features a voltage limitation of 22 V which is the optimum for garden layouts which often suffer of voltage drops. This should not be a problem for decoders that are in compliance with the NMRA standard. This standard requires decoders to be able to handle voltages up to 27 V. Decoders of Massoth® and LGB® are tested for max 30V to be able to guarantee a stable and consistent operation. A separate programming track outlet, booster connection and a user friendly PC Programming interface are integrated as well. The 1210Z provides a connector for LGB® or DiMAX boosters on the back of the unit.|
|8135501 DiMAX 1200T Switching Power Supply - £280.00|
|The universal power supply for G-Scale!
This external high performance switching power supply is a major extension of the DiMAX product range using a certified high quality industrial switching power supply with PFC (automatic power factor correction). It comes in the Massoth high quality aluminum housing system. This power supply is the ideal power source for the Central station and booster from the DiMAX series.
Operating voltage: 110V - 230 V
Output voltage: 24 V
Output current: 13 A (15 amps peak)
Dimensions: 170 x 80 x 245 mm
|8137501 DiMAX 1202B Digital Booster - £454.00|
|The new 12 amp DiMAX Digital Booster will be available
by summer 2015. It offers two 6 amp units with individual
setting or a combined 12 amp unit.
The voltage is adjustable from 14 to 22 Volt.
(Picture shows 8141001 DiMAX 1203B)
|8133101 R/C Receiver Mk 2 - £103.00|
|The DiMAX Receiver enables you to operate the DiMAX Navigator with a DiMAX central station or a LGB MTS III central station. The DiMAX Multi Receiver facilitates the operation of a maximum of 8 Navigators at the same time. The receiver is connected to the XpressNet and the LocoNet via 2 plugs. The additional Massoth plug may be used for cable operation or for charging the batteries of the Navigator.
Charging power is provided by the digital bus. A range of approximately 300 ft facilitates a safe operation at all times. 4 frequencies are available to ensure an operation without interferences by other devices. An activity LED reports the current operating status of the receiver at all times.
The DiMAX Multi Receiver is equipped with the latest state-of-the-art technology. You may update your receiver to the latest firmware at all times. The data transfer during updating is accomplished between the central station and your PC.